The All-New Wulf Evolve Maxxx 3-in-1 by Wulf Mods is a multifunctional, versatile device made specifically for endless concentrate sessions. A portable, adaptable piece it delivers top performance and vapor your way.

A multi-use concentrate device it is made to deliver an amazing performance with elevated, versatile sessions. Utilizing QTC technology, three temperature settings and automatic heating, they come together to bring users the best of the best. It also has an added built-in silicone jar and airflow value for the richest flavors.

To get started, first start by turning on the device. You can do this by pressing the singular power button five times rapidly in a row. Keep in mind that if you don’t do it quick enough the device won’t register the action. Once the device is on, the Wulf Evolve Maxxx 3-in-1 will soon heat up. Using that same button, press it three times in a row to change the temperature. The button will glow according to the matching temperature informing the user of the voltage output. White indicates 3.2V, Blue indicates 3.7V and Green indicates 4.2V.

This device also allows a preheat mode for quicker warm up times. To start this, click on the power button two times to begin the cycle. The unit will preheat for about 15 seconds. To stop this mode, press the same power button another two times in a row.

To use Dab Rig Mode first start by screwing in the coil into the base of the device. Then screw the airflow piece into the base and screw that onto the battery. Once that is built, attach the glass adapter. User tip: to get the best performance, make sure all of the connections on the unit have been cleaned prior to use.

Now you are going to want to remove the cap from the dual coil quartz or triple coil atomizer and place your concentrates directly into the chamber. After this fill your rig with the desired amount of water. Insert the battery into the adapter of the rig. Once activated, inhale from the mouthpiece. Press the carb once the rig is filled with vapor to release airflow.

To use Nectar Collector Mode start by screwing the mouthpiece onto the top of the battery. On the other side of the device screw the base onto the battery and the nectar tip. An important note to remember is to make sure that the heating tip has fully cooled down before removing it. It can be extremely hot.

Once the heating tip has warmed up to the desired temperature, press the tip against the concentrate and gently inhale. Simple as that!

To use Wax Pen Mode, screw your desired coil into the base and attach the mouthpiece. Then you are going to screw the mouthpiece onto the battery. To begin your session, remove the cap from the dual coil quartz or triple coil quartz atomizer and place your concentrates into the chamber. Close it back up and you’re ready to go.

Once the battery has been assembled and loaded, power it on and select your desired temperature. Inhale and enjoy! The Evolve Maxxx 3-in-1 is compatible with both Evolve Plus and Regen Coils.

When you first receive the unit, charge it for at least 2 hours. After the first charge, do not charge it for more than 1 hour. Charging the battery for more than an hour could ruin the battery or wear down the lifespan.

To turn it off, press the power button five times rapidly. It will stay in standby mode when it is not in use. You will know when your device is fully charged when the LED on the charger changes from red to green.

WARNING: Do not charge with a power bank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.